NX Tether compatibility and troubleshootingNX Tether lets specific Nikon cameras take pictures while connected to a computer via a USB connection or over a WIFI network. Exposure, white balance, and other camera settings can be adjusted remotely using controls in the computer display. NX Tether can be downloaded from Nikon Download Center and is currently free to use. Compatibility information WindowsMacintoshCompatible OS Microsoft Windows 11Microsoft Windows 10 Note: Pre-installed versions. 64-bit edition (32-bit systems not supported). macOS Sonoma 14macOS Ventura 13macOS Monterey 12macOS Big Sur version 11macOS Catalina version 10.15 Note: The software runs natively on Apple SiliconCompatible cameras All Nikon Z mount mirrorless camerasD6 & D780 DSLR cameras Information regarding WIFI connection mode for NX Tether The following models require the use of WT-7 (Sold seperately): Z 7II, Z 7, Z 6II, Z 6, D780The following models require the use of WT-6 (Sold seperately): D6The following models does not support WIFI connection with NX Tether: Z 5, Z 30, Z 50, Z fc Important notes: NX Tether may not function as expected if used simultaneously with Camera Control Pro 2, Nikon Transfer 2, or other software designed to control or download pictures from cameras connected to the computer. Exit Camera Control Pro 2 and Nikon Transfer 2 before launching NX Tether.Loading a settings file created with high-frequency flicker reduction enabled on the camera may result in shutter speed being set to a value different from that stored in the settings file. TroubleshootingThe camera is connected but not detected by NX Tether? NX Tether can only detect and work with compatible cameras listed above.Are the camera and computer connected properly? Turn the camera off and reconnect the USB cable to the computer directly, avoid connecting thru a USB hub. Are you also using another software designed to control or download pictures tethered/connected to the computer (Such as Camera Control Pro 2, Nikon Transfer 2 and et)? If yes, quit NX Tether and any other tethering software then restart NX Tether.If not, Click [Disconnect] to end the connection between the camera and NX Tether and then reselect the camera using [Connected Camera]. The camera is disconnecting randomly, or data transfering speed is slow. Try connecting with another USB Cable.Try swapping the USB ports from the computer.Try disabling [USB power delivery] from camera setup menu, especially on a long USB cable for camera supporting USB-PD. How can I connect my camera wirelessly to NX Tether? NX Tether can be connected wirelessly for selected cameras listed above.In general, you will need to connect using a host profile configured for [Camera control]. Do note that, the wireless connection can not work simultaneously with other network profile. Only one profile can be active at a time. Can I use Live View from NX Tether? NX Tether does not support Live View showing in software, please consider using Camera Control Pro 2 instead. Can't take pictures? Check if a memory card with sufficient storage is inserted in the camera when [Computer + Card] or [Card] is selected as the destination.Check if NX Tether has access permission for the destination folder, this is usually controlled by OS. Can't change or adjust settings? When [Enable Controls on Camera Body] is enabled in the [Camera] menu, some settings can only be adjusted using the controls on the camera body.Some settings may not be available depending on the option selected for [Exposure Mode]. Powering the camera for continuous usage. USB power delivery (PD) is supported with selected model including the Z 9, Z 8, Z6III, Z 30,Z f, Z fc, Z 5, Z 6II and Z 7II models. Note that this will require a USB-PD compatible cable and the USB port designated for power supply.Power connectors and AC adapters can be used to power some camera models for extended periods. The list of compatible accessories can be found here. Print Share By Email Share By Social Ask A Question FaceBook Twitter